1. Products
  2. Rock and tunnel
  3. Grouting
  4. Single-use packer

Single-use packer PSU-P 54, high pressure

Single-use packer intended for use with high pressure in both pre- and post-grouting applications.
Application area High pressure
Packer type Single-use packer
Borehole diameter (mm) Ø53-56

Vi löser specialbeställningar, fler varianter vid förfrågan!

Color code
Yellow
Rubber length packer (mm)
140
Max working pressure (bar)
100
Torque on the tightening nut (Nm)
80-100
Single-use packer intended for use with high pressure in both pre- and post-grouting applications. A compressible mechanical packer used for sealing boreholes at the tunnel face, in forepoling, excavation pits, and similar applications. The packer (rubber element) expands when the locking rings are pressed against the packer’s end pieces. The packer should not be exposed to direct sunlight or temperatures above 50°C. The recommended torque to be applied to the tightening nut is 80–100 Nm to ensure proper anchoring in the borehole and to prevent grout leakage between the borehole wall and the packer.